1.No dipsticks are not the same length.
Both types will bolt up to either engine as long as the flexplate,bellhousing and convertors all match.The only prob is if you use the C4 with the smaller flexplate/bellhousing on a clevo a clapper starter with touch the sump rail,bosch starter is ok.
how does one check the size of the bellhousing, are there some measurements, as i am building a C4/C10 for my car to replace the FMX and i have a clapper starter, better make sure, save getting it all in there and realising i need to chase a starter before i can drive anywhere
I'd try grabbing the metal dust plate that sandwiches between the block and C4/C10 and hold that against the block/trans to compare if everything will line up. Hopefully this will give a visual indication as to whether one bellhousing is larger then another.
problem is that i wont be able to do that untill the old box is out
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Forums
1.4M posts
115.4K members
Since 1999
Ford Forum is a community to discuss all things Ford. Check out our discussions on the Ford Escape, Mustang, Edge, F-150, Raptor, Explorer, Focus, Fusion, Fiesta and more!