Ford Forums banner

94 Ford Explorer IAC ??

3K views 2 replies 0 participants last post by  Big Shoe 
G
#1 ·
I'm looking for the IAC on this SUV and I see three devices, can someone
help me identify the idle air control valve?
tnx
Hank
 
G
#2 ·
Hey Henry,

If you are standing on the drivers side of the engine compartment (by the
battery), and looking at the top of the engine (on top of the intake
manifold) you'll see a more-or-less cylindrical object bolted on with 2
bolts. That's your IAC valve. There is a 2-wire connection to the IAC as
well.

I'm assuming you need to clean it. Just unbolt from the intake manifold,
then have at it with a can of throttle body cleaner.

For reference, the Autozone online manuals are very helpful for identifying
and servicing parts.

http://www1.autozone.com/servlet/UiBroker?UseCase=RG001&UserAction=processModel&Parameters=002

Good luck.

Chris


"Henry Kolesnik" <kolesnik@sbcglobal.net> wrote in message
news:Jl2Me.802$hF1.323@newssvr30.news.prodigy.com...
> I'm looking for the IAC on this SUV and I see three devices, can someone
> help me identify the idle air control valve?
> tnx
> Hank
>
 
G
#3 ·
Note that you have to first remove the plastic cover from over the top
of the engine so that you can see and get to the IAC. I had mixed
experience cleaning the valve on my '99, probably better to get a new
one.

On Mon, 15 Aug 2005 14:17:52 -0400, "Chris" <chrishelmer@hotmail.com>
wrote:

>Hey Henry,
>
>If you are standing on the drivers side of the engine compartment (by the
>battery), and looking at the top of the engine (on top of the intake
>manifold) you'll see a more-or-less cylindrical object bolted on with 2
>bolts. That's your IAC valve. There is a 2-wire connection to the IAC as
>well.
>
>I'm assuming you need to clean it. Just unbolt from the intake manifold,
>then have at it with a can of throttle body cleaner.
>
>For reference, the Autozone online manuals are very helpful for identifying
>and servicing parts.
>
>http://www1.autozone.com/servlet/UiBroker?UseCase=RG001&UserAction=processModel&Parameters=002
>
>Good luck.
>
>Chris
>
>
>"Henry Kolesnik" <kolesnik@sbcglobal.net> wrote in message
>news:Jl2Me.802$hF1.323@newssvr30.news.prodigy.com...
>> I'm looking for the IAC on this SUV and I see three devices, can someone
>> help me identify the idle air control valve?
>> tnx
>> Hank
>>

>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top