Just tried to fit new window regulator in my Discovery. Got everything out
easily enough, and then found that the motor is fixed to the mechanism with
bloody Torx headed bolts. My largest Torx driver is too small at 25.
Anyone know the correct size, so I can get the right one?
I'd like to strangle the blocke who designed teh Torx head, plus any
designers who use them and engineers who torque them to riduculous levels.
Graham Carter <grahamcarter@hotmail.com> wrote:
> ...
> I'd like to strangle the blocke who designed teh Torx head, plus any
> designers who use them and engineers who torque them to riduculous
> levels.
For each and every invention there is an equal and opposite reason not to
employ them.
Graham Carter wrote:
> I'd like to strangle the blocke who designed teh Torx head, plus any
> designers who use them and engineers who torque them to riduculous levels.
Why? It's almost impossible to strip the drive on one so they're a huge
improvement over philips, pozi and hex drive screws/bolts. A one-off
investment in a decent set of Torx drivers and they're no problem.
EMB wrote:
> Why? It's almost impossible to strip the drive on one so they're a huge
> improvement over philips, pozi and hex drive screws/bolts. A one-off
> investment in a decent set of Torx drivers and they're no problem.
Not many folks know that Phillips screws were DESIGNED to strip, when
they reached the correct torque.
Graham Carter wrote:
> Just tried to fit new window regulator in my Discovery. Got everything out
> easily enough, and then found that the motor is fixed to the mechanism with
> bloody Torx headed bolts. My largest Torx driver is too small at 25.
> Anyone know the correct size, so I can get the right one?
>
> I'd like to strangle the blocke who designed teh Torx head, plus any
> designers who use them and engineers who torque them to riduculous levels.
>
> Cheers!
> Graham Carter
On or around Sun, 18 Dec 2005 17:25:30 +0200, "Graham Carter"
<grahamcarter@hotmail.com> enlightened us thusly:
>Just tried to fit new window regulator in my Discovery. Got everything out
>easily enough, and then found that the motor is fixed to the mechanism with
>bloody Torx headed bolts. My largest Torx driver is too small at 25.
>Anyone know the correct size, so I can get the right one?
>
probably 27 or 30. But it's worth having a complete set these days, they're
all over the place.
--
Austin Shackles. www.ddol-las.net my opinions are just that
"The great masses of the people ... will more easily fall victims to
a great lie than to a small one" Adolf Hitler (1889 - 1945)
from Mein Kampf, Ch 10
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Forums
1.4M posts
115.4K members
Since 1999
Ford Forum is a community to discuss all things Ford. Check out our discussions on the Ford Escape, Mustang, Edge, F-150, Raptor, Explorer, Focus, Fusion, Fiesta and more!