|
Re: 94 Ranger is my Master Cylinder broke?????
"kevin" <kevnospam242@gmail.com> wrote in message
news:c5e0t11c177favcvi094o8gjs97sd3cu9f@4ax.com...
>
> My problem started a couple weeks ago. The ABS light came on, aprox
> 1/2 hour later my brakes were not working properly. The pedal felt
> all wrong (goes all the way down with no pressure) and it sounded like
> the breaks were intermittingly stopping (like skidding) when they did
> work... very dangerous to drive this way.
>
> I took the truck home and checked the fluid, it turns out the fluid is
> low, so I replaced it, still no puddles in the driveway and from
> checking the inside (quick look) and around the wheels no leaks.
>
> I took it up to the garage where I bought the truck and the guys up
> there (without looking at it) say it sounds like it need's a master
> cylinder. What is your opinion? Is there anything else I should
> check into before I buy a MC and try to install it myself? Any advise
> about installing a Master Cylinder?
How low was the reservoir? It may take more than a "quick look" to find the
leaking component. Until you determine where the fluid went, all we can do
is speculate.
Dave
|
