|
Re: 94 explorer transmission modulator question
On Sat, 21 Jan 2006 03:25:38 GMT, Sam <goway@nunya.com> wrote:
> I need to replace the modulator valve on my transmission for
>my 94 EB 4x4 Explorer.
>
> Can anyone share their experience with this. I have read the
>articles in the glue webpages which were kind of negative.
>
>I have 165k and the modulator needs to be replaced for sure and I just
>wanted to be informed before I tackled this project.
>
>Thanks,
>
>Sam in Raleigh,N.C.
As I recall from what I read the main things are..
- it's hard to get to
- there is a pin/pintle/rod inside it that you want to make sure you
don't let fall out as you take it out. I'm not sure if it will come
out as you take the mod out or if it sticks in the bore of the tranny
but just be careful that you are ready to catch anything that comes
loose.
I had mine done at a garage so I'm not speaking from experience but
other then being hard to get to (you'll have to remove the heat shield
assuming someone didn't already remove it and throw it out like my
shop did. I made them pay for a new one.) and it's still pretty tight
looking between the tranny and the exhaust system.
|
