|
Re: 2002 headlight switch knob removal
I cannot remember 'exactly' how I got it off but I did. Inside the slot,
there is a little clip that sits in a groove. You have to move the clip so
it is not sitting in the groove so that you can slide off the knob. Once
you get it off, you will easily see how it works.
If I remember correctly, I used a tiny screwdriver and moved the clip back
towards the nose of the car while pulling on the knob. It's very tiny and
very hard to see how it works while the knob is on. It's a spring clip.
Sorry I cannot be more helpful than that.
"SquidInk" <wakeme@noon.com> wrote in message
news:4ZGdncyTg5GeDG7enZ2dnUVZ_sidnZ2d@comcast.com...
> I want to remove the dash gauge cluster from my 2002 V6 Mustang ragtop but
I
> can't get the headlight switch knob off. The aftermarket manual I have
says
> to use a small screwdriver to press the tab in the slot of the knob shaft
> and pull; and there is a slot in the knob shaft with a visible metal tab;
> but I have tried unsuccessfully on several occasions to get the knob off.
I
> have pushed that little metal tab forward, backwards, in, out, down and
even
> tried pulling on it with forceps, but the knob won't budge. Is there a
> trick to getting this darn thing off? Any tips?
>
> Thanks - Squidly
>
>
|
