RSCamaro

On Wed, 15 Feb 2006 12:37:23 -0800, "SquidInk" <wakeme@noon.com>
wrote:

>I want to remove the dash gauge cluster from my 2002 V6 Mustang ragtop but I
>can't get the headlight switch knob off. The aftermarket manual I have says
>to use a small screwdriver to press the tab in the slot of the knob shaft
>and pull; and there is a slot in the knob shaft with a visible metal tab;
>but I have tried unsuccessfully on several occasions to get the knob off. I
>have pushed that little metal tab forward, backwards, in, out, down and even
>tried pulling on it with forceps, but the knob won't budge. Is there a
>trick to getting this darn thing off? Any tips?
>
>Thanks - Squidly

Try the button on the switch. A small button on the switch behind the
face plate will allow you to remove the whole rod from the switch. You
have to pull the rod out until the button depresses and then you can
pull it out.

The lights will be on so you may want to disconnect the battery or
gently push the switch rod in until the lights go out without locking
the rod back in place.

...Ron
--
68'RS Camaro
88'Formula
00'GT Mustang