Quote:
|
Originally Posted by azza
Can you weld on a rear diff brace without disassembling the diff? i want to also fit a drain and fill kit. Any ideas? or has anyone got info on a sheetmetal housing? I just priced a competition engineering chome moly housing and its 1100 dollars.
AZZA
|
Take it out and get a competant engineer with a jig to perform this task,this is four big HP cars usually drag cars.
You can get a big housing 9"[truck] and a small housing 9"which is another option ,my housing was'nt measuring up ,so I took it to a specialist when he fitted it to a jig -it was bent by 9mm ,which would have caused major problems if run?.
He's reckons its pretty common to see housings bent , he recommends a rib fitted if you are launching very hard with big HP/Torgue because they do bend
