rrobello

6. Get the correct Torx bit and unscrew the three torx screws attaching the mirror motor.





7. Gently pull out the motor and unclip the wiring from the back of the motor. The later motors that came along in 06 have an uncommon looking harness. It has a funky saddle type harness that has two clips on either side of the motor.





8. Remove the wiring harness from the stock housing.





9. Clip wiring back onto the mirror motor.





10. Thread the wire harness through the new mirror housing.



11. Screw the factory motor in place using the three stock torx screws.