first off, hi. i am new to the forum, i have a 99 crown vic with 90,000 miles on it. my problem just started, it stalls when you take your foot off the gas, any suggestions? i read the codes and it had one that was p1311, the other one was c6200. any help would be appreciated
first off, hi. i am new to the forum, i have a 99 crown vic with 90,000 miles on it. my problem just started, it stalls when you take your foot off the gas, any suggestions? i read the codes and it had one that was p1311, the other one was c6200. any help would be appreciated
I don't see those codes listed on the OBD-II code list. As for your problem, sounds like a typical IAC issue. The Idle Air Control valves are notorious for failing on these motors. It's definitely a DIY job if you're even half decent at turning wrenches. The part is $50 for a Wells unit from Autozone and I believe up around $100 for the Motorcraft part if you want the OEM replacement.
thanks for the quick replies, i think it is the idle air control valve, i tapped on it with the butt end of a screwdriver and it started and idled fine. i will get one and replace it soon. thanks
very easy to fix. very common failure point on these cars. you are lucky to have had it go 90k miles.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Forums
1.4M posts
115.4K members
Since 1999
Ford Forum is a community to discuss all things Ford. Check out our discussions on the Ford Escape, Mustang, Edge, F-150, Raptor, Explorer, Focus, Fusion, Fiesta and more!