|
2 good cyl 2 bad... Lifters or timing?
ok so i have posted about my car in some other posts and was told to check the compression heres the result from front to back of engine
cyl 1 is at 120psi
cyl 2 is at 115psi
cyl 3 is at 0psi
cyl 4 is at 0psi
I even went back to cyl 1 and 2 to make sure the guage wasnt cloged i checked them all twice the key was turned over for 5-10 seconds.
Could this be bad timing issue causing the 3rd adn 4th cyl not to raise or could it just be bad lifters?
|
