hi i have a 95 mustang 3.8 5 speed i just had a new clutch put in it. i got it two weeks ago and ever since i got it it grinds when i would put it in second. so one day when i put it in i taped the shifter a couple times and when i let off the clutch no grind and that always works now but for some reason it wont do it without the tap. it even grind when i do a double clutch on less i tap it a few time before i let the clutch out thanks for any help.
well it did it before i put the clutch in it i was thinking the motor or tranny mount because if the synchros were bad i should be able to double clutch.(or so i think)
when its in first or third and im going to second i push the clutch in move it to second and then tap it like when your kicking some tunes and let the clutch out and its in that easy
That's probably the 2nd gear synchro. The trans will have to come out.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Forums
1.4M posts
115.6K members
Since 1999
Ford Forum is a community to discuss all things Ford. Check out our discussions on the Ford Escape, Mustang, Edge, F-150, Raptor, Explorer, Focus, Fusion, Fiesta and more!