xafalcon

Hi Brian

Thanks for the wiring diagram, it has filled in many of the blanks. I still have a few questions. It would be great if you had the time to answer them if you are able to. The TFI module is mounted on the distributor as you suspected.

1) Are ignition switch pins 11 and 12 12V+ve on start and run?
2) How is the neutral safety switch wired in a manual? Pin 30 to 12V+ve, earth, or no connection?
3) On the TFI distributor there is a red/blue wire running to the 8 pin plug. This comes out of the other side of the plug as a Red/grey wire. Does this go to the start position of the ignition switch.
4) What is an infrared milage sensor? Do I need one or can I leave it out?

Thanks again for your help.

Best regards
Tris