95 Crown Vic air suspension problems - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71 Forum for discussion of the Ford Crown Victoria, Mercury Marauder, Mercury Grand Marquis and P71.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 12-04-04, 01:15 PM Thread Starter
Registered User
 
Join Date: Dec 2004
Posts: 1
confused 95 Crown Vic air suspension problems

Hi there!

My dad has a 95 Crown Vic and he's having problems with his air suspension system. The compressor is brand new from last year, so he doesn't think that might be broken. Is there a switch or solenoid that controls the air flow to the rear? Because only his rear end seems to have a problem, cause it's almost touching the ground right now. He told me when he puts the ignition off, he hears a "ting" noise like something closing a valve or something like that. I don't really know what to look for. He went to Ford and they told him they don't touch this anymore... what kind of dealership is this?

Did anybody here had a similar problem? I've seen there's a way to swap in some coil springs and shocks, but i'd rather find something for him that can be done quick so he can use his car in a few days. I guess doing that swap must cost a lot of money and must have custom work to be done.. Anyway, any help is welcome!

Thanks alot!
Zack
zallow is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 01-03-05, 07:39 PM
Registered User
 
Join Date: Jan 2005
Posts: 5
Re: 95 Crown Vic air suspension problems

I have the same problem with my 1994 marquis it is sitting in my lane ass end on the ground, i have no clue what is wrong either so if you get a reply please email me....i wish i hadnt bought one with air ride...

~Scott
Scottie_D is offline  
post #3 of 4 (permalink) Old 01-03-05, 07:44 PM
BA'o'Matic 100% working.
 
Dellboy999's Avatar
 
Join Date: May 2003
Location: Victoria
Age: 44
Posts: 3,838
Re: 95 Crown Vic air suspension problems

assuming they work the same as aussie cars, climb underneath, and located near the diff high up will be control module for the height sensor, remove it, strip it down, and check for dry solder joints or just solder all the joints that look dodgy, then re-fit and it should be all working fine.

I did put something here, but it vanshied, I think

"So long and thanks for all the fish!"
Dellboy999 is offline  
post #4 of 4 (permalink) Old 01-05-05, 04:34 PM
Registered User
 
Join Date: Jan 2005
Posts: 5
Re: 95 Crown Vic air suspension problems

Ha my problem is solved....all i had to do was reconnect the sensor it came off some how...ha easy fix thank you lord
Scottie_D is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71
Gear in this thread - Powered by O'Reilly Auto Parts


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
DTC Codes fordel Ford Focus Forum 8 02-22-09 12:22 AM
air suspension nav1998_666 Ford Expedition Forum | Lincoln Navigator Forum 0 11-14-04 09:01 AM
Suspension Problems - PLEASE HELP hockey1416 Suspension | Wheels&Tires | Brakes 1 07-22-04 08:33 PM
USA:Air bag rule turns 20 with mix of success, tragedy Stacy94PGT Ford Worldwide News 0 07-11-04 06:20 AM
U.S.A.:Jury finds Ford negligent in air bag death, awards $3.3 million verdict Stacy94PGT Ford Worldwide News 0 11-13-03 12:16 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome