95 CV Actuator lever/rod replacement?
My 95 CV won't turn off and I have determined that one of the actuator levers/rods is broken and does not control the ignition switch box. Does anyone know how to replace the actuator levers that control the ignition switch box? I removed the steering wheel and the bolts on either side of the steering column but was unable to remove the front portion of the tilting steering column to gain access to the actuator rods. I was so close but was afraid to remove the spring or the pins holding the tilt adjusters on the underside of the steering column. I wasn't sure I would be able to put it back together. Maybe there is another way or trick to replacing these pieces of plastic designed to fail.