Engine Fluid Quantities - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Forum Ford Forum

» Auto Insurance
» Featured Product
ยป Wheel & Tire Center

Go Back   Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71
Register Home Forum Active Topics Photo Gallery Auto Loans Garage Mark Forums Read Auto Escrow

Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71 Forum for discussion of the Ford Crown Victoria, Mercury Marauder, Mercury Grand Marquis and P71.

FordForums.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 09-05-2007, 11:04   #1 (permalink)
Registered User
 
Join Date: Sep 2007
Posts: 3
Engine Fluid Quantities

I am looking for the engine fluid qantities for a 1995 4.6 L V8 engine. I specifically need Oil amount, Coolant Amount, Transmission Fluid amount, Brake Fluid amount and power steering amount.

Thanks,
Rob
wrf8215 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-05-2007, 11:46   #2 (permalink)
Registered User
 
dryelf327's Avatar
 
Join Date: Sep 2006
Location: Houston
Posts: 105
Re: Engine Fluid Quantities

Check this out:

Crownvic.net: UBB Error
__________________
My Fords:
'98 Crown Vic LX
-167k miles and counting. Still used as daily driver.

'99 Crown Vic Police Interceptor
-Completed full PI swap
-Marauder Airbox & 80mm MAF
-'04 CVPI Ziptube
-ADTR ported plenum
-Steeda Intake Spacer
-BOC tune
-J-Mod tranny
dryelf327 is offline   Reply With Quote
Old 09-05-2007, 12:59   #3 (permalink)
Registered User
 
Join Date: Sep 2007
Posts: 3
Re: Engine Fluid Quantities

I cannot access the site.
wrf8215 is offline   Reply With Quote
Old 09-05-2007, 13:59   #4 (permalink)
Registered User
 
Nathan in MN's Avatar
 
Join Date: Feb 2006
Location: Corcoran, MN
Age: 26
Posts: 283
Re: Engine Fluid Quantities

Do you have the owner's manual for the car? Should tell in there...
__________________

1989 Ford Crown Victoria Police Interceptor
2bbl Carbureted 351W V8, ported and polished E7TE heads, Edelbrock cam
AOD Transmission with B&M Shift Kit
3.55:1 Positraction Rear Axle
Visit My Car Domain Account Here Updated 1/27/07!
Nathan in MN is offline   Reply With Quote
Old 09-05-2007, 14:11   #5 (permalink)
Registered User
 
dryelf327's Avatar
 
Join Date: Sep 2006
Location: Houston
Posts: 105
Re: Engine Fluid Quantities

I don't know what happened with the link but I copied all the info. Here ya go:




Engine Oil w/ filter change:
Capacity:
-02: 5 quarts
03+: 6 quarts
5w30 is speced for -00 4.6ls, 5w20 for 01+
Engine oil filter is Motorcraft FL-820S (not for 5.0)
Dipstick reading overules specification
Cooling system:
Capacity:
-97: ~13.3 liters
98+: ~17.9 liters
Coolant recommendation chart: Click Here
Fill until coolant reaches cold full level line on reservoir with engine cold
Transmission:
Capacity:
~13.9 quarts
Use Mercon V for all 92.5+ panthers (AODE family (AODE/4R70W/4R75W/4R70E/4R75E))
Some 2005+ models have a sealed transmission, no dipstick
Rear Axle:
Capacity:
-02: ~3.75 pints
03+: ~5.0 pints
Service refill capacities are determined by filling axle 1/4 inch to 9/16 inch below bottom of filler hole. Vehicle must be level with ground.
75w140 is spec'ed for the rear axle bearing TSB kit, and factory fill for Limo and now Police applications. Most use 75w140 when changing the differential fluid
80w90 was factory fill for most years
Traction-lok axles also require 4oz of Motorcraft XL-3 friction modifier
Fuel tank:
Capacity:
Gasoline vehicles
-97: 20 gallons
98+: 19 gallons
NGV vehicles
10.0 Gasoline Equivalent Gallons
Gasoline vehciles must use unleaded gasoline with a minimum of 87 octane rating. 1998-1999 Town Cars and 03-04 Marauder require Premium fuel, 91+ octane
Fuel filter part number:
-97: FG-800A
98+: FG-986B
Power Steering system:
Capacity:
98+: ~2 pints
-97 w/ Power steering cooler (HPP/TOW/CVPI -97): 2.6 pints
-97 w/o power steering cooler (non-HPP/TOW/CVPI): 2.2 pints
Use Mercon ATF for your power steering system
Windshield washer reservoir:
2.1 quarts
__________________
My Fords:
'98 Crown Vic LX
-167k miles and counting. Still used as daily driver.

'99 Crown Vic Police Interceptor
-Completed full PI swap
-Marauder Airbox & 80mm MAF
-'04 CVPI Ziptube
-ADTR ported plenum
-Steeda Intake Spacer
-BOC tune
-J-Mod tranny
dryelf327 is offline   Reply With Quote
Old 09-05-2007, 18:02   #6 (permalink)
Registered User
 
Nathan in MN's Avatar
 
Join Date: Feb 2006
Location: Corcoran, MN
Age: 26
Posts: 283
Re: Engine Fluid Quantities

FWIW, when I worked for Hennepin County Public Works, we did the maintenance on all the police vehicles, most of which were Crown Vics, of course, '03 or newer. 5.5 quarts was all it ever took to fill them using the Napa 1372 filter (Motorcraft FL-300).
__________________

1989 Ford Crown Victoria Police Interceptor
2bbl Carbureted 351W V8, ported and polished E7TE heads, Edelbrock cam
AOD Transmission with B&M Shift Kit
3.55:1 Positraction Rear Axle
Visit My Car Domain Account Here Updated 1/27/07!
Nathan in MN is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 13:10.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.