pullin codes on a 92 cv - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71 Forum for discussion of the Ford Crown Victoria, Mercury Marauder, Mercury Grand Marquis and P71.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 10-29-06, 03:53 PM Thread Starter
Registered User
 
bonneville92's Avatar
 
Join Date: Oct 2006
Location: port perry,ont.
Age: 43
Posts: 23
confused pullin codes on a 92 cv

well as the title says, i know how to get the codes from my 94 SHO, but was wondering how to do it on the CV and does anyone have a list of codes and there meanings, i'd like to do a check on it. thanks.

bonneville92 is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 10-29-06, 04:22 PM
Police Officer/Rescue Tec
 
ryoder's Avatar
 
Join Date: Mar 2005
Location: Morganton,N.C.
Age: 52
Posts: 274
Re: pullin codes on a 92 cv

Get a HAynes manual from Autozone or Advance,O'Reilly's and it will give you all the information you need. It's about the best $20 you'll spend. It'll give you the codes and the way to access them with just a piece of wire. I've did this with mine alot to get a reference point on where to start when diagnosing a problem and fixing it.That manual has paid for itself about 1K times.
ryoder is offline  
post #3 of 4 (permalink) Old 10-29-06, 04:49 PM
HO conversion guru
 
Join Date: Aug 2005
Location: Georgia
Posts: 83
Re: pullin codes on a 92 cv

the codes and the pulling the codes is pretty much the same on most fords with EEC-IV. the test connector is on the drivers inner fender, closer to the front of the car.

codes are here; www.fordfuelinjection.com 3 Digit Self-test Codes
88grandmarq is offline  
post #4 of 4 (permalink) Old 10-30-06, 04:52 AM Thread Starter
Registered User
 
bonneville92's Avatar
 
Join Date: Oct 2006
Location: port perry,ont.
Age: 43
Posts: 23
Re: pullin codes on a 92 cv

thanks for the info guys, i'm going to go out and run a test just to see if there is anything in memory that i don't know about, car runs fine. just giving her a going over. start with a clean slate.
bonneville92 is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71
Gear in this thread - Powered by O'Reilly Auto Parts


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome