Will Mustang exhaust fit on a vic? - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71 Forum for discussion of the Ford Crown Victoria, Mercury Marauder, Mercury Grand Marquis and P71.

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 12-20-07, 08:57 PM Thread Starter
Registered User
 
Join Date: Dec 2007
Posts: 5
Will Mustang exhaust fit on a vic?

Waz up guys? I'm very new to these forums and had a question about Crown-vic exhaust. Could you use (or can you fit) a mustang "h" or "x" pipe on a crown-vic? I'm about to get a used P71 and would like to fix it up somewhat. Thanks

P71-Drifter is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 12-20-07, 09:52 PM
Registered User
 
Nathan in MN's Avatar
 
Join Date: Feb 2006
Location: Corcoran, MN
Age: 28
Posts: 283
Re: Will Mustang exhaust fit on a vic?

What year is the car? I know the Mustang H-pipe will fit on the 5.0/5.8 cars, but if you've got a newer one ('92+) I'm not sure if it'll go on or not.


1989 Ford Crown Victoria Police Interceptor
2bbl Carbureted 351W V8, ported and polished E7TE heads, Edelbrock cam
AOD Transmission with B&M Shift Kit
3.55:1 Positraction Rear Axle
Visit My Car Domain Account Here Updated 1/27/07!
Nathan in MN is offline  
post #3 of 9 (permalink) Old 01-01-08, 12:59 PM Thread Starter
Registered User
 
Join Date: Dec 2007
Posts: 5
Re: Will Mustang exhaust fit on a vic?

I dont have the car yet, but I'm looking to getting 98-up P71 from this place in Cartersville that used P71s is all they sell. I was just wondering Because I have looked under a few vics and noticed how similar the exhaust is set up in relation to SN95 stangs. I'd like to do mine (when I get it) with an off-road Xpipe and 40series Flows.
P71-Drifter is offline  
post #4 of 9 (permalink) Old 01-02-08, 04:49 PM
Registered User
 
Join Date: Nov 2007
Posts: 3
Re: Will Mustang exhaust fit on a vic?

I assume you mean headers by exhaust.

I was told by a local speed shop that specializes in mustangs that the 4.6l crown vic's cant use the 4.6l SOHC Mustang exhaust because of routing issues. To date i've still not found an aftermarket header for my car. I'm not sure what you wanna spend but there's always the custom header option...

Hope that helps, kinda.
mjsmith939 is offline  
post #5 of 9 (permalink) Old 01-03-08, 09:34 AM
Registered User
 
Nathan in MN's Avatar
 
Join Date: Feb 2006
Location: Corcoran, MN
Age: 28
Posts: 283
Re: Will Mustang exhaust fit on a vic?

If you're looking for headers for a 4.6 Crown Vic, take a look here: ADTR.net

Just make sure you're sitting down when you look at the prices, though.


1989 Ford Crown Victoria Police Interceptor
2bbl Carbureted 351W V8, ported and polished E7TE heads, Edelbrock cam
AOD Transmission with B&M Shift Kit
3.55:1 Positraction Rear Axle
Visit My Car Domain Account Here Updated 1/27/07!
Nathan in MN is offline  
post #6 of 9 (permalink) Old 01-03-08, 03:27 PM
Registered User
 
Join Date: Nov 2007
Posts: 3
Re: Will Mustang exhaust fit on a vic?

wowowow! Indeed that is quite pricey but i'm sure it's worth it. Eventually I am going to do a rebuild. Stage2 head/cam/lower intake swap and supercharge the car - i've been looking for a better than stock header before I even attempt the swap and now and i may have found it.

thats a cool site. I thank you for directing me to it. I'll prob start dumping money now. :)
mjsmith939 is offline  
post #7 of 9 (permalink) Old 01-03-08, 07:08 PM Thread Starter
Registered User
 
Join Date: Dec 2007
Posts: 5
Re: Will Mustang exhaust fit on a vic?

Quote:
Originally Posted by mjsmith939
I assume you mean headers by exhaust.
I was actually Talking about the h/x pipes, I'm not so worried about the headers.
Thanks though.
P71-Drifter is offline  
post #8 of 9 (permalink) Old 01-04-08, 03:42 PM
Registered User
 
Nathan in MN's Avatar
 
Join Date: Feb 2006
Location: Corcoran, MN
Age: 28
Posts: 283
Re: Will Mustang exhaust fit on a vic?

Quote:
Originally Posted by mjsmith939
wowowow! Indeed that is quite pricey but i'm sure it's worth it. Eventually I am going to do a rebuild. Stage2 head/cam/lower intake swap and supercharge the car - i've been looking for a better than stock header before I even attempt the swap and now and i may have found it.

thats a cool site. I thank you for directing me to it. I'll prob start dumping money now. :)
You're welcome...but now you see why I mess around with 20 year old cars instead of newer stuff...


1989 Ford Crown Victoria Police Interceptor
2bbl Carbureted 351W V8, ported and polished E7TE heads, Edelbrock cam
AOD Transmission with B&M Shift Kit
3.55:1 Positraction Rear Axle
Visit My Car Domain Account Here Updated 1/27/07!
Nathan in MN is offline  
post #9 of 9 (permalink) Old 01-04-08, 09:25 PM
Registered User
 
tbird100636's Avatar
 
Join Date: Jan 2005
Location: Massachusetts
Age: 34
Posts: 1,835
cool Re: Will Mustang exhaust fit on a vic?

Quote:
Originally Posted by P71-Drifter
I was actually Talking about the h/x pipes, I'm not so worried about the headers.
Thanks though.
There used to be a company called Dr. Gas that made an X-Pipe for the Vics and Grands.

Master ASE Certified L1 Chrysler Technician- still a Ford fan at heart.
1964 Thunderbird Hardtop- Chantily Beige- 390 FE 4V V8-Uncle's Car
1966 Thunderbird Convertible- Red- 390 FE 4V V8- Uncle's other car- waiting for paint and body work!!!
tbird100636 is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Crown Victoria | Mercury Marauder | Grand Marquis | P71
Gear in this thread - Powered by O'Reilly Auto Parts


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome