jakeq19

Here is one for all you L6 300 owners. I parked my truck about 1 1/2 months ago and went to start it the other day and it turned over fine but would not start. I checked for fuel and no problems there then I checked for spark. No spark at all. The battery is fine and I have power to the coil when the ignition is in the on possition. The cap and rotor are new. All plug wires are also good. When I turn the engine over the voltage drops at the coil from 12v to nothing. I need to take the truck in to have the front end worked on ( the reason I parked it) but need to get it started first. any suggestions would be great! Thanks Boys!!!!

I forgot to tell you I replaced the coil and no change. It was worth a shot.

jakeq19

I tested the eec module from the side of the distributer today and it tested good. still looking and testing.

jakeq19

sorry it was the TFI module not the eec but at any rate it was good. Today i bought a new pick-up coil and will install it tomorrow. still open to any suggestions.

jakeq19

It was a rotton wire from the ignition switch to the TFI module