Dyno Chassis Facility Sydney - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
The Pub For General Discussion

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 08-26-02, 06:41 PM Thread Starter
Registered User
 
Join Date: Aug 2002
Location: Sydney, Australia
Posts: 22
Dyno Chassis Facility Sydney

Guys,

A new tuning shop has been opened in the western suburbs of Sydney. First off there will be only a DD 2wd dyno with additions later on down the track. Feel free to check it out.

Anyone who wants a dyno run and some advice on whats going on with their engine/setup feel free to message me. Our prices for non-dyno day sessions will be only slightly more expensive but a more personal level of service will be assured.

Also on site is a mechanical engineer (as am i) who has been working in the emissions testing field. He has been involved in various RTA emissions testing programmes and knows the IM-240 emissions test drive cycle (the one used by the RTA for emissions testing).

Our facility has a dyno dynamics dynomax 450 dyno, Autronic AF/R as well as a 5-gas analyser. We can handle just about any after market engine management system from microtech to motec.

We are thinking of organising a dyno day for fords only at $40 per car. That will include 3 power runs, a power graph and plenty of free advice about future mods :)

So ask away!

Unigroup Engineering
Chassis Dyno Facility
Unit 17/17A Amax Ave
Girraween, Sydney
www.unigroup.com.au
Phone: (02) 9631 2470
Fax: (02) 9631 8306
Unigroup is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 08-26-02, 07:07 PM
gone
 
laminge's Avatar
 
Join Date: Feb 2001
Posts: 10,402
Welcome to the forums

Hope that the relationship with the forum members only increases!

Thanks
laminge is offline  
post #3 of 4 (permalink) Old 08-26-02, 09:42 PM
Two SC 61's = trouble
 
ebxr8240's Avatar
 
Join Date: Jul 2001
Location: Penrith,nswAus/Morrinville.NZ
Age: 62
Posts: 6,360
Hmm name and number taken..

Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...
ebxr8240 is offline  
post #4 of 4 (permalink) Old 09-18-02, 04:32 AM Thread Starter
Registered User
 
Join Date: Aug 2002
Location: Sydney, Australia
Posts: 22
Guys,

There will be $45 dyno runs this saturday at our premises.

All are welcome :)

Unigroup Engineering
Chassis Dyno Facility
Unit 17/17A Amax Ave
Girraween, Sydney
www.unigroup.com.au
Phone: (02) 9631 2470
Fax: (02) 9631 8306
Unigroup is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > The Pub


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Volvo S80 Available With FOUR-C Active Chassis Debuts at Amsterdam Motor Show RPO83 Volvo 0 02-07-03 12:11 AM
Dyno Day Sydney Unigroup On the Road in Australia 10 09-10-02 03:12 PM
Sydney Dyno Day - March 10th XR8chic On the Road in Australia 2 03-08-02 07:28 PM
40km/h for North Sydney CBD Falchoon The Pub 9 02-24-02 10:04 PM
We need dyno confirmations Fozzie Ford Probe Forum | Mazda MX6 Forum 6 01-08-02 07:35 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome