Monaro - To be built in US??? - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
The Pub For General Discussion

LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 10-05-04, 07:02 PM Thread Starter
FFing Festive
Madder's Avatar
Join Date: May 2003
Location: Far S.E. Melbourne
Posts: 597
frown Monaro - To be built in US???

Looks like the thin edge of the wedge along with today's talk of a Chinese Territory.



From Mellor:

Holden looks to the US to export 'Adventra' – and import Monaro

By BRUCE NEWTON 4 October 2004

THE future of a replacement for Holden’s Adventra cross-over wagon could hinge around a plan to export the vehicle to the US.

Although it is unclear which of GM’s North American brands would receive Adventra, GoAuto has learned the code GMX283 has been given to the project.

An export deal is believed to be vital to the development of a business case for an Adventra replacement, which is expected to become more separated from the Commodore wagon in its second generation guise.

But Holden has struggled to make the numbers add up for the vehicle that will be based on the forthcoming Zeta architecture. Hence the need to nail down exports, with the US looming as a significant opportunity.

At the same time, it appears any concerns expressed by US union workers would be soothed by a plan to manufacture the Monaro coupe in the US and ship it to Australia.

That would be possible because Pontiac plans to manufacture the next generation GTO in the US, both cars sharing the Zeta architecture.

An export program to Australia of the next generation GMT361 truck as a Toyota LandCruiser rival would also help smooth the way.

All this trans-shipping would be made possible by the Australia-US free trade agreement, due to be ratified in late October.

"Building the Monaro in the USA is possible," said Holden managing director Denny Mooney. "We are not yet publicly ready to say where some of that stuff is going to be built though.

"We have said before that Zeta will be built in North America, maybe one plant, maybe two plants, maybe three plants.

"The reality of not being able to say where it’s going to be built … is because when we decide to put a product in a plant it’s a pretty formal process and we work with the UAW and there’s a lot of approvals and internal and external communications."

Mr Mooney said there would be some definite advantages for Holden if the Monaro – a low-volume car – was manufactured in the US.

"As an example, if they built the coupe in the USA, they would do the tooling … then we are not spending the money in Australia on that, we are spending it on something else," he said.

"Maybe we do sheetmetal on our wagon or cross-over, or Crewman. Maybe we could do some things we couldn’t afford this time round."

The future home of Monaro is part of a larger vision triggered by Zeta-based cars being built around the world.

It could be Holden’s Elizabeth plant finds itself building less bodystyles in bigger numbers for domestic and international consumption, and effectively trading vehicles with other GM regions.

"At the end of the day if it’s a great product and we are doing the engineering and development on it, then I would hope where it was built wouldn’t be as emotional," Mr Mooney said.

"We have four bodystyles and today they have a lot of commonality. If I had my druthers (choice), I would get more uniqueness in those products even if it meant I had to build them in different locations, with the understanding the products would be better products and used in our market and their market.

"Whatever we were building would be higher volume levels. I would have fewer bodystyles in the plant and less complexity. I could improve productivity and improve quality, get better product at the end of the day."

* Holden’s compact concept car, revealed in GoAuto e-news and set to make its world debut in Sydney next month, appears to be based only loosely on GM’s low volume rear-drive Kappa architecture.

The reborn ‘Torana’ is said to have underpinnings inspired by Kappa. The core of the Kappa chassis design is hydroformed frame rails which run the length of the vehicle.

Possessed by FF and the Silver Devil
Madder is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > The Pub

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Monaro Accessories. casrms1450 The Pub 5 09-19-04 03:11 AM
Monaro Set for Middle East Markets GMACK24 The Pub 0 12-12-03 08:10 AM
Monaro and jonk The Pub 11 04-09-03 01:36 PM
Brock and son to race in a Monaro Falchoon The Pub 5 01-31-02 04:00 AM
please read me (wheels) HSE2 The Pub 32 10-15-01 02:46 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome