robbrown359

Hello I Am A New Member!!!!!! I Have A 1988 Ford Bronco I changed The Auto. Hubs to manual since I did tha I can Not get My shifter to go in nurtrale or four low. Thanks stuck in the Mud!!!!!!!!!

 

Vlad_Padberg

Did you do anything else like the linkage to the T-case.

'92BigBronco

Changing you hubs should have no effect on whether or not you can get into 4 low or not. I converted my auto hubs to manual Warn hubs and it didn't cause any problems. Normally, there is a lockout that forces you to have the tranny in neutral, have your foot on the brake, and be at rest before you can shift into 4 low. Check your manual for the exact procedure as it differs depending on if it's a manual tranny, manual t-case, etc.

__________________
1992 Ford Bronco
351W
E4OD- B&M Stage 2 shift kit
Full 3" stainless Bassani Exhaust
32" BFG's/stock suspension

"No replacement for displacement."

"Our lugnuts require more torque than most Honda's produce!"

LunaticSVT

I am thinking the along the same lines with Vlad. Look at the linkage to the TCase.