Guess my reply was totally ignored?
well, here is the timing info
http://www.motorcraftservice.com/pub...EN/CKL2901.htm
read it! it is same as the Vehicle Emission Control Information (VECI), PUK (49 States) Decal under the hood
you can searh again in case your Calibration # is diff from above.
http://www.motorcraftservice.com/vdi...l&type=EEFACTS
Warm up engine,
turn eng off
disconnect Spout connector
adjust timing to 10 deg. before top dead center
turn eng off
re-connect Spout connector,
then
CHECK FOR CODES