95 Taraus brake problems - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Taurus | Mercury Sable | Ford Taurus SHO | 1986-2007 Forum for discussion of the Ford Taurus, Mercury Sable and Ford Taurus SHO. Covers vehicle years: 1986-2007

 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 10-04-10, 05:02 PM Thread Starter
Registered User
 
Join Date: Oct 2010
Posts: 1
Question 95 Taraus brake problems

Replaced Rear Calipers on 95 Taurus unable to bleed Right rear no fluid coming out. Brake line and hose OK. Left side ok able to bleed and caliper is working. Looks like there is a valve attached to left rear under car with a spring and lever that attaches to the rear axle. Has 4 lines and looks like 2 valves where the lever is which controls the fluid flow to rear calipers. What is the name of this valve and can I rebuild it. Or where can I find info on this valve. I want to call it a anti sway proportion valve but uncertain if that is right name.
1995 Taraus SE with 3.0L
ABS is Teves Mark4 nonintergral type.

Tried to manual and power bleed. free up valve without taking it apart or off the car. Replaced all pads and cut rotors along with outer tie rod end replacement.

never4get is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 10-04-10, 05:54 PM
Registered User
 
Sterling_Six's Avatar
 
Join Date: Aug 2008
Location: Green Bay, WI
Posts: 1,135
Re: 95 Taraus brake problems

Quote:
Originally Posted by never4get View Post
Replaced Rear Calipers on 95 Taurus unable to bleed Right rear no fluid coming out. Brake line and hose OK. Left side ok able to bleed and caliper is working. Looks like there is a valve attached to left rear under car with a spring and lever that attaches to the rear axle. Has 4 lines and looks like 2 valves where the lever is which controls the fluid flow to rear calipers. What is the name of this valve and can I rebuild it. Or where can I find info on this valve. I want to call it a anti sway proportion valve but uncertain if that is right name.
1995 Taraus SE with 3.0L
ABS is Teves Mark4 nonintergral type.

Tried to manual and power bleed. free up valve without taking it apart or off the car. Replaced all pads and cut rotors along with outer tie rod end replacement.

Hello and good day:

Is there any way you could provide a Photo of the Valve?? Sounds like a "SPlitter valve".

Good Luck and good repairing Sterling_6
"You know, just like in that Book, When Jesus beats up Moses to get Religion!!"
Sterling_Six is offline  
post #3 of 3 (permalink) Old 10-05-10, 08:42 AM
Moderator
 
Join Date: Nov 2008
Posts: 1,137
Re: 95 Taraus brake problems

That is the anti plow valve and will not cause the problem you describe. I've yet to see one that actually still works and not seized up.
chipset is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Taurus | Mercury Sable | Ford Taurus SHO | 1986-2007


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome