willard

How to remove passenger manual seat to replace with power seat track. Now, can anyone tell me if any Taurus 2001 to 2007 had a 6-way power passenger seat?

 

tbird100636

Assuming there is a connector under the seat for it the seat just unbolts from the floor. There may be plastic covers over the bolts. Make sure you get the right power seat track, and be aware that you may have to have the OCS (Occupant Classification System/Passenger Airbag Disable system) recalibrated after transfering the seat back and cushion to the new track.

__________________
ASE Certified Technician- still a Ford fan at heart.
1964 Thunderbird Hardtop- Chantily Beige- 390-Uncle's Car
1966 Thunderbird Convertible- Red- 390- Uncle's other car- needs a hood!!!
2001 Taurus SEL- Spruce Green- 3.0L Duratec- my first car purchase- traded it for a 2006 Dodge Charger R/T (it only made sense, I work at a Dodge Dealer{Now a Chrysler Dealer, the Dodge Dealer closed!!!})

SHOZ123

I swapped my '97 from power to manual.

You need the seat base with the motors and screw track. Assuming you have the power connector.

The seat base is held to the seat with 4 bolts. Manual and power seat bases are interchangeable.

willard

How can I remove the plastic covers so I can get to the bolts holding the seat to the car floor? I want to add power seat track.

jwko

moved to the correct section and merged with previous thread

__________________

SHOZ123

The covers pop off.