gaskets and some deteriorated hoses. In doing so had to remove fuel
rail and injectors. Pulled spark plugs with only about 15K and regapped them to .054. Used dielectric grease on plug wires at plugs and coil. Snapped all wires back onto connections.
Cleaned throttle body with choke/carb cleaner. Replaced EGR
Put everything back and checked plug wiring order.
. Stumbled due to no fuel at first and stopped. Recranked and started with foot on the accelerator. Now it ran but sounded very rough. Had to keep throttle way down to keep it running. It got up to 2500 RPM
but sounded like it wasn't firing on all cylinders. ran like this for about 20 to 30 seconds and when I took my foot off of the accelerator it quit running.
Has a new fuel filter (6 months ago) and the PCV
valve was replaced about a year ago.
Seems like it isn't firing on 2 or more plugs. Know that I snapped all electrical connectors onto the fuel injectors till the clicked and bottomed.
I thought it might just be fuel wasn't getting to the injectors but after 30 seconds the fuel should be pumping to all injectors.
Plugs not firing?
Injectors not firing?
What would you check next?