71 Torino - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

torino500tt · 01-19-2009, 10:19

hi my name is joe and i am tryin to start building cars. however i ran into a problem. iam building a 1971 Torino 500 for my father and im sure as you kno this car has the 351C 2V engine. well i planned on turbocharging the car the problem is that the kit i want to buy and all the other i looked at are ment to fit the 351W. now my real question is are there any people in here who are familiar with the engine and kno where the oil feed and oil return ports are on the exterior of the engine or even if there is any. i would greatly appreciate any and all help. thanx

mil1ion · 01-19-2009, 18:08

Ford 335 engine - Wikipedia, the free encyclopedia

Matt Cramer · 01-20-2009, 07:08

You can get the oil feed from the oil pressure sending unit hole, but I'd drill and tap the oil pan for the oil return. Unless you go with a turbo mounted above the valve covers, in which case you can drain the oil into the valve covers instead.