2lovable

I have a 2000 Mustang and tried to insert a new gauge face. However, I can't do this without removing the light knob. How do I remove it.

Thanks for your help!

zader_04

pull the knob out, and on the bottom take a tiny screw driver and hold the clip back while you pull the knob out, make sure your gauges don't rub on your spedo or tach, i had this problem, ended up pullong the guages out,

dashiznit74

A lil screwdriver might work but i had the same problem trying to fiigure out how to get it off.. i found that a lil hook pick thing works much easier! the notch on the switch i faced down and hooked the pick in the notch to release the clip and pulled using the pick to help!!! worked great for me

Tape

Pull the Headlight Knob all the way out and rotate it counter clockwise till it stops. You should be able to now see the slot with the keeper inside. Insert a small screw driver into the slot and push the metal keeper to the rear of the car. It may be easier to hold the knob with your right hand and then push the release towards the rear of the car. There is not a lot of movement when you release the keeper, it is just a pressure fit.

__________________
If Tape can't fix it, It ain't broke!

Tape

geesh, just noticed, this thread was posted in April 06

__________________
If Tape can't fix it, It ain't broke!