water temp. sencor - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Mustang Forum This forum is for the discussion of all Ford Mustang models, including the Ford Mustang, Ford Mustang Convertible and Ford Mustang Coupe and all older/classic models and submodels.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 04-09-04, 12:19 PM Thread Starter
Registered User
 
Join Date: Apr 2004
Posts: 5
water temp. sencor

i have a 66 200 i6 and say facing the front of the car on the back right of my engine is an adapter with a bolt in it i took it out ofcourse the coolant came out and i was guessing that this was the place for my water temp sencor so i put one in there cause my temp wire is close to that area and was not hooked up but upon looking around i found a website inline six forever or something like that and on this guys head is the same thing i was wondering if anyone knew if i was wrong to do that or where the correct place is cause im stumped the sencor i bout did no fit so i bought an adapter for it and the screw where the wire goes onto does not fit the new sencor please help

FordSmallBlock is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 04-09-04, 03:41 PM
FF.com Administrator
 
Big Block Ford's Avatar
 
Join Date: Apr 2001
Posts: 4,784
Re: water temp. sencor

Hi . I don't know for sure where the temp sender is situated on a 6 cyl 66 Stang but I doubt you will have done any harm fitting it where you have and it will probably work fine . Maybe some one with a vehicle like this will respond with the answer otherwise I'll have a search to see if I can find some info.

Lance
71 429SCJ Mustang
Big Block Ford is offline  
post #3 of 4 (permalink) Old 04-09-04, 04:25 PM Thread Starter
Registered User
 
Join Date: Apr 2004
Posts: 5
Re: water temp. sencor

thanx bud for your help on both subjects
FordSmallBlock is offline  
post #4 of 4 (permalink) Old 04-10-04, 12:28 AM
FF.com Administrator
 
Big Block Ford's Avatar
 
Join Date: Apr 2001
Posts: 4,784
Re: water temp. sencor

Glad to be of help mate.

Lance
71 429SCJ Mustang
Big Block Ford is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Mustang Forum
Gear in this thread - Powered by O'Reilly Auto Parts


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
What temp should actual coolant temp be? MarkT Ford E-Series Trucks 4 05-20-04 03:32 PM
What water temp should my 351 run at? DansEdgli Cleveland Tech 10 01-14-04 01:07 PM
Any other way for water to get into oil apart from a cracked head/gasket?? Axeman82 Inline 6 Tech 7 11-04-03 11:13 PM
XF temp sender XF_boy Inline 6 Tech 6 01-17-03 11:02 PM
Where does the water go ? Golgotha13 General Tech 7 05-02-02 08:15 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome