fastbysuzuki

whats the best way to bleed the clutch master cylinder when replacing it please, mr fordtech thanks for the link to the transitparts on ebay it is the same, saved me £30 plus cheers.

 

Fordtech.

Leave the outlet pipe off the m/cyl and start to top up until the fluid runs out, pop the pipe back in, pump the pedal for a while then undo the bleed nipple, keep pumping and topping up, when you feel resistance close the nipple, pump again, release nipple pump several then retighten, repeat until firm.

fastbysuzuki

thanks again mr fordtech