Fitting a coil pack - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Focus Forum Forum for the discussion of the Ford Focus

LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 11-20-08, 09:49 AM Thread Starter
Registered User
Join Date: Nov 2008
Posts: 1
Fitting a coil pack

Hi there,
I have a ford focus 1.6 petrol, lx model. Its 2003 with around 75,000 on the clock.
I have a fault which feels like a misfiring problem at low revs (only while accelerating, and only up to around 2000 revs).
By reading other posts on this forum it seems this problem is likely to be the coil pack?
So my question is, how hard is it to fit a new one? I have limited knowledge, but also limited money so would prefer to fit myself than go to a garage!
Any advise would be greatly appreciated.
Thanks in advance, Richard.

rjmorley16 is offline  
Sponsored Links
post #2 of 2 (permalink) Old 01-27-09, 08:13 AM
Registered User
Join Date: Jan 2009
Posts: 1
Re: Fitting a coil pack

Richard its dead simple just 4 screws buuuuuut you will need to get a special star screwdriver ( torc i think its called )

1 unplug the leads from the top of the coil
2 remove the 4 screws
to unplug the last lead you have to remove the spring clip then un plug it
refir is the same reverse
i did mine in 20 minutes last sat
nigelb is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Ford Focus Forum

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome