starting problems 1.8tdci 2003
as im sure some of you will know i have been on here regarding PATs problems not so long ago but since i have fixed that i am faced with the other problems with car that i new about when i bought it
i was able to get the car running if i used easy start or similar
and seemed to run fairly well but if you turn it off again it doesn't want to start.
i have checked the glow plugs are getting power.
i thought the car had injector problems so i managed to get a set of injectors form a scrap yard, im using a formidable lead and software to try and reprogramme the injectors but i doesn't seem to remember them, it sometimes goes to random numbers and sometimes to old numbers...
i dont really know where to go from here because i don't want to spend to much money on it but the cars to good to scrap
i know i could get injectors tested but its all money at the end of the day,is there anything else that could be causing this other than the injector/ fuel pump
The other thing that isnt clear is what order should the injectors be prgrammed?
on the software its displayed as
injector 1 : is this cylinder 1?
injector 3 : is this cylinder 2? or 3?
injector 4 : is this cylinder 3? or 4?
injector 2 : is this cylinder 4? or 2?
if any of this makes any sence
thanks for peoples help and advice in advance
Last edited by dave9675; 11-19-12 at 06:11 PM.
Reason: adding information