Ford Forums banner

1991 Ranger 4x4 Button wont turn on

4K views 2 replies 3 participants last post by  360ci 
#1 ·
I pushed the button, I don't hear anything, nor does the light turn on. I tapped the motor on the T case lightly with a rubber screw driver, still nothing. My next step is the 4x4 module, but where is it? I wanted to make sure it was connected. Let me know your thoughts. Thank you.
 
#3 ·
The TCCM, or transfer case control module is under the dash toward the floor; between the foot well area. If there's no center console then it'll be tucked up under the dash.

If the TCCM is shot, make sure you buy used. Even though a used one is a mixed bag in terms of reliability, it's 2/3 less than the cost of one through the dealer. A dealer TCCM is no better than going used in terms of future reliability, and you'll save a couple hundred bucks in the process for the part.

Worst case is that the transfer case itself is on its way out, hence it won't engage.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top