snoopi

Had to reaplce brake lines and after bled the brakes. Pedal was decent, not great. I noticed the Brake and Read Anti Lock lights are always on.

I started to get low pedal after a few weeks and realized I had a line that was leaking at the joint so I replaced it and once again checked for leaks and bled the brakes. Got little pedal and now no brakes at all. No leaks and not loosing any fluid. Pedal goes to the floor and gives a bit of brake and then there is nothing and the truck rolls like no brakes are being pushed at all.

Is there an ABS thing that needs to be bled? Should I just gravity bleed, then start the normal bleeding process from there?

Any help would be greatly appreciated. Seeing a dealer is out of the question, this has become a thing between me and the truck and I dont intend on losing the battle

 

ranger_guy_82

Sounds to me like your master cylinder is going out.

snoopi

after playing all day with it......came to the same conclusion, cleaned up the area and realized teh cylinder was leaking where it connects to the big round thing-a-ma-bob


Thanks for the help