sdecosse

Hi

Truck is a 2004 Ranger 4x4. Standard transmission, just as of this weekend i was driving and lost my clutch, the peddle goes to the floor. I checked my fluid and it was still at the full mark.

The next morning, the clutch worked fine, but again after a few times of using the clutch it stopped working once again.

No fluid on the ground (snow here so easy to spot if it was).

Any ideas? If i let it sit the clutch works again for 5 or so times.

Bert

When the pedal is going to the floor, pinch off the rubber hose and press the pedal lightly. If the pedal is solid, there's a problem in the clutch assy. If not, you need a master cylinder. I'd suspect the master cylinder.

__________________
Bert