69 302 heads help - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Ranger Forum Forum for discussion of the Ford Ranger.

LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 10-29-09, 07:22 PM Thread Starter
Registered User
Join Date: Oct 2009
Posts: 1
69 302 heads help

I'm doing a 302 swap in 2002 ranger edge I have a 88 302 H.O and pair of 69 closed chamber heads. I bought the heads from a guy off of the internet and he told me that the rocker studs where 3/8 so I didn't pay any attention and installed them. I then attempted to install my roller rockers and discovered that the studs are way to small. I measured them and they appear to be 5/16 or 1/4 which I've never encountered before. I've looked everywhere for 5/16 roller rockers with no luck. Are there any? If not what is my best solution without taking the heads off. I've tried to double nut the studs and unscrew them and that's not an option. I'm stuck if anyone can help it would be greatly appreciated. Thanks
haydenjr33 is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Trucks | Utes | Vans |SUVs | Crossovers > Ford Ranger Forum
Gear in this thread - Powered by O'Reilly Auto Parts

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome