88 Ranger cooling systems hose routing help. - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Ranger Forum Forum for discussion of the Ford Ranger.

 
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 09-09-07, 03:16 PM Thread Starter
Registered User
 
Join Date: Dec 2005
Posts: 49
confused 88 Ranger cooling systems hose routing help.

I have an 88 ranger that im redoing the cooling system on, its a 2.3L fuel injected engine. Now the problem im having is that the guy I bought it from was a **** up and now I dont know how to route one set of hoses, (and no the Haynes book dosnt help me either)... It looks like this rig circulates water in the block before the thermostat opens, I get that part. There is one steel line that wraps around behind the dome cover and comes out to the front of the engine. He nigger rigged it with a Tee and bypassed the heater core, now I need to know where and how Ford had that steel line plumed up. Were it attaches to, any Tees or any of the other hoses it goes to.

MadModderModa is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Trucks | Utes | Vans |SUVs | Crossovers > Ford Ranger Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome