92 Ranger front lights
About 2 weeks ago I ended up being getting a '92 jade green Ford Ranger STX extended cab with 4.0L V-6 and a 5 speed, it's the 2x4 model btw.
I'm being a bit lazy as I'm sure there are archived posts on these two things but how does one gain access to the front turn/parking and side marker lights on a 2nd gen Ranger? I figured out how to get the top of the bezel housing loose, but haven't figured out how to disconnect the bottom portion to gain access to the bulbs down there. Only the front side marker bulbs need replacing there.
Also, I have the stock driving/fog lights down just below the bumper and both bulbs are, I think burnt out. Any suggestions on replacing those without dismantling the units themselves? I found that they have a wiring plug back there but that's all I could figure out in the short time I had to look.
Thanks in advance.
Oh, will be locating an owner's manual and a maintenance book on it as well.