I have a 90 Ranger 2.9L V6 4X4 and I just finished putting a new cab on the frame. The engine turns over fine, but I'm not getting any fuel. I checked the wiring and I'm not gettin power to the pump or to the emergency shut off switch. I tried switching the switch, fuses, and relays and still no power.
Any ideas?
I have a 90 Ranger 2.9L V6 4X4 and I just finished putting a new cab on the frame. The engine turns over fine, but I'm not getting any fuel. I checked the wiring and I'm not gettin power to the pump or to the emergency shut off switch. I tried switching the switch, fuses, and relays and still no power.
Any ideas?
my first guess is you left a plug un-pluged somewhere--start at the fuel tank and start tracing forward--bob
Well, I didn't leave anything unplugged, but I replaced the whole wiring today from the drivers side fender back and it fixed the problem. thanks anyway.
Well, I didn't leave anything unplugged, but I replaced the whole wiring today from the drivers side fender back and it fixed the problem. thanks anyway.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
