Originally Posted by jesse92
i gatta 92 ranger 2.3 with the 8 plugs and yesterday after i changed the plugs and wires it wouldnt start , just cranks and cranks no miss fire or nothing. now i had to replave the ignition module once already. i just got the new one tested to see if it was good and it passed so now im not sure what it is. any suggestions would be great. thanks . jesse
Did you check to besure you had the wires connected up correctly? If not, that may well be your problem.
If you didn't do this, you should've pulled one wire at a time, matched it up with identical wiring from new wires and replaced that. That will eliminate that problem, usually.
Also, check to be sure you have all the wires fitting snuggly on the distributor cap and on the plugs themselves.
A loose/crossed wire will most likely be what it is.