OFR's COLD AIR INTAKE - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
FPV & Tickford Forum GT, GT-P and all FPV Discussions. Formerly Tickford.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 65 (permalink) Old 09-20-04, 06:15 AM Thread Starter
Rip Up The Track Join OFR
 
XRFPV8's Avatar
 
Join Date: May 2003
Location: Melbourne
Posts: 6,021
OFR's COLD AIR INTAKE

After a long wait our OFR CEO Ray has given the all clear, and after many hours spend by my friend Michael here it is the new OFR CAI. We were looking for something that what give us clean cold air and the only way to do that, so its not hindered by body parts and radiator and hoses heating things up before it hits our T/B.. One way to do this is run the pipe out of the headlight that is an awesome way to get cold air but it takes a long time to take the front bar on and off the car. so that left us searching for a place to get air so it had to be under the car. I have had it on my Ute since late Saturday night and will be tested on the APS Dyno this Friday when my Ute will be re-tuned. Then Calder Friday night. I hope it works Michael from MJS Bars can fabricate any thing but with out drawings it a lot harder. Here are some pictures...

Thx to Mick, Rod & APS for there help

Attached Images
File Type: jpg 1562.jpg (25.5 KB, 269 views)
File Type: jpg 1563.jpg (27.7 KB, 267 views)
File Type: jpg 1565.jpg (40.5 KB, 298 views)






PHANTOM BA XR8 UTE, AUTO, UNICHIP, APS TUNED 229 RWKW ET:13.47.

Rods Rocket, Boss n/a 290 Unichip Tuned by APS et:12.6@110 Mph
We are all inclined to judge ourselves by our ideals; others, by their acts.


XRFPV8 is offline  
Sponsored Links
Advertisement
 
post #2 of 65 (permalink) Old 09-20-04, 06:16 AM Thread Starter
Rip Up The Track Join OFR
 
XRFPV8's Avatar
 
Join Date: May 2003
Location: Melbourne
Posts: 6,021
Re: OFR's COLD AIR INTAKE

Its made from all aluminum with a stainless steel top and intake pipe which is 81mm measured inside the tube,

With a K&N Pod Filter that has an 82mm neck...

Michael from MJS Bars can make anything to suit in stainless or alloy.

his number is 0438 371 196..there is no price for this yet lets do the testing make some changes if needed and take it from there...

OFR is King join OFR and enjoy the free KWs..LOL..
Attached Images
File Type: jpg 1549.jpg (24.9 KB, 102 views)
File Type: jpg 1555.jpg (20.3 KB, 106 views)
File Type: jpg 1557.jpg (24.3 KB, 83 views)
File Type: jpg 1561.jpg (29.1 KB, 96 views)






PHANTOM BA XR8 UTE, AUTO, UNICHIP, APS TUNED 229 RWKW ET:13.47.

Rods Rocket, Boss n/a 290 Unichip Tuned by APS et:12.6@110 Mph
We are all inclined to judge ourselves by our ideals; others, by their acts.


XRFPV8 is offline  
post #3 of 65 (permalink) Old 09-20-04, 06:19 AM Thread Starter
Rip Up The Track Join OFR
 
XRFPV8's Avatar
 
Join Date: May 2003
Location: Melbourne
Posts: 6,021
Re: OFR's COLD AIR INTAKE

The pipe that runs down to the scoop fits between the rail and the oil filter..
Attached Images
File Type: jpg 1564.jpg (33.1 KB, 87 views)
File Type: jpg 1556.jpg (18.2 KB, 50 views)
File Type: jpg 1554.jpg (21.2 KB, 55 views)
File Type: jpg 1559.jpg (21.1 KB, 51 views)






PHANTOM BA XR8 UTE, AUTO, UNICHIP, APS TUNED 229 RWKW ET:13.47.

Rods Rocket, Boss n/a 290 Unichip Tuned by APS et:12.6@110 Mph
We are all inclined to judge ourselves by our ideals; others, by their acts.


XRFPV8 is offline  
post #4 of 65 (permalink) Old 09-20-04, 06:22 AM
The SB Slayer
 
FPVGT's Avatar
 
Join Date: Sep 2003
Location: Should be polishing my GT's
Posts: 1,529
Re: OFR's COLD AIR INTAKE

Quote:
Originally Posted by XRFPV8
Its made from all aluminum with a stainless steel top and intake pipe which is 81mm measured inside the tube,

With a K&N Pod Filter that has an 82mm neck...

Michael from MJS Bars can make anything to suit in stainless or alloy.

his number is 0438 371 196..there is no price for this yet lets do the testing make some changes if needed and take it from there...

OFR is King join OFR and enjoy the free KWs..LOL..
Ring me if you need a gas line hooked up to it Mark.LOL
Franes Plumbing & Gasfitting

THERE CAN ONLY BE ONE LEGEND THE GT is back

Introducing the Boss 290 powerplant
The Boss 290 combines the best of both worlds, with race-bred power and everyday comfort. The awe-inspiring Boss 290 is a powerplant unlike any ever built in this country and comes to life on Australia's only current V8 production line.
FPVGT is offline  
post #5 of 65 (permalink) Old 09-20-04, 06:25 AM Thread Starter
Rip Up The Track Join OFR
 
XRFPV8's Avatar
 
Join Date: May 2003
Location: Melbourne
Posts: 6,021
Re: OFR's COLD AIR INTAKE

Quote:
Originally Posted by FPVGT
Ring me if you need a gas line hooked up to it Mark.LOL
Franes Plumbing & Gasfitting
would work well Alex a shot or 2 in that box lol...






PHANTOM BA XR8 UTE, AUTO, UNICHIP, APS TUNED 229 RWKW ET:13.47.

Rods Rocket, Boss n/a 290 Unichip Tuned by APS et:12.6@110 Mph
We are all inclined to judge ourselves by our ideals; others, by their acts.


XRFPV8 is offline  
post #6 of 65 (permalink) Old 09-20-04, 06:31 AM
The SB Slayer
 
FPVGT's Avatar
 
Join Date: Sep 2003
Location: Should be polishing my GT's
Posts: 1,529
Re: OFR's COLD AIR INTAKE

Quote:
Originally Posted by XRFPV8
would work well Alex a shot or 2 in that box lol...
It will only cost you a Bottle of Beam

THERE CAN ONLY BE ONE LEGEND THE GT is back

Introducing the Boss 290 powerplant
The Boss 290 combines the best of both worlds, with race-bred power and everyday comfort. The awe-inspiring Boss 290 is a powerplant unlike any ever built in this country and comes to life on Australia's only current V8 production line.
FPVGT is offline  
post #7 of 65 (permalink) Old 09-20-04, 06:33 AM
The SB Slayer
 
FPVGT's Avatar
 
Join Date: Sep 2003
Location: Should be polishing my GT's
Posts: 1,529
Re: OFR's COLD AIR INTAKE

Quote:
Originally Posted by XRFPV8
Its made from all aluminum with a stainless steel top and intake pipe which is 81mm measured inside the tube,

With a K&N Pod Filter that has an 82mm neck...

Michael from MJS Bars can make anything to suit in stainless or alloy.

his number is 0438 371 196..there is no price for this yet lets do the testing make some changes if needed and take it from there...

OFR is King join OFR and enjoy the free KWs..LOL..
Looks the goods well get out there and test it now looking forward to the results.

THERE CAN ONLY BE ONE LEGEND THE GT is back

Introducing the Boss 290 powerplant
The Boss 290 combines the best of both worlds, with race-bred power and everyday comfort. The awe-inspiring Boss 290 is a powerplant unlike any ever built in this country and comes to life on Australia's only current V8 production line.
FPVGT is offline  
post #8 of 65 (permalink) Old 09-20-04, 06:34 AM
walking power
 
Fordy's Avatar
 
Join Date: May 2001
Location: who cares
Posts: 3,035
Re: OFR's COLD AIR INTAKE

Look the goods Mark, look forward to seeing the results from testing.
Fordy is offline  
post #9 of 65 (permalink) Old 09-20-04, 06:38 AM Thread Starter
Rip Up The Track Join OFR
 
XRFPV8's Avatar
 
Join Date: May 2003
Location: Melbourne
Posts: 6,021
Re: OFR's COLD AIR INTAKE

Quote:
Originally Posted by FPVGT
It will only cost you a Bottle of Beam
Thx for the offer Alex but i aint putting no laughing gas down the throat of my Boss, not that desperate yet...lol






PHANTOM BA XR8 UTE, AUTO, UNICHIP, APS TUNED 229 RWKW ET:13.47.

Rods Rocket, Boss n/a 290 Unichip Tuned by APS et:12.6@110 Mph
We are all inclined to judge ourselves by our ideals; others, by their acts.


XRFPV8 is offline  
post #10 of 65 (permalink) Old 09-20-04, 06:45 AM
rod
Registered User
 
rod's Avatar
 
Join Date: Apr 2003
Location: Melbourne
Age: 53
Posts: 2,784
Re: OFR's COLD AIR INTAKE

Mark these pictures dont do it justice, after seeing it fitted to the car the pictures run a poor second,the job that Michael has done on it is brilliant it will be gr8 to see the final results

regards
rod

the toes that you step on today may be attached the the legs that hold up the a$$ that you may need to kiss tomorrow
rod is offline  
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > Australian Ford's Discussion > FPV & Tickford Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
!! I6 FAQ !! <--- Newbie's Look Here Con Inline 6 Tech 83 11-28-04 04:49 AM
CAPA BA XR8 Cold Air Intake? hoich Australian Falcons 6 04-19-04 05:17 AM
Ef - cold air intake adamvw Inline 6 Tech 7 11-28-03 08:15 PM
cold air intake on a ghia MustangNicko General Tech 5 06-09-03 03:33 AM
cold air intake gmanEA General Tech 13 03-21-02 03:03 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome