Dark Aon

Ive got a mk3 Fiesta 1.1 1993.
Ive bought an alarm system for it (Sigma s4) and am just looking for some advise on the best place to conect the wires for it.
I need some clean power feeds, a 15 and 3 amp and im not sure the loom has one so i might have to make them.
Also need some feeds from the hazards, interior lamps and door, boot and bonet switches. Oh and from my igniton feeds. I know it dosnt have a bonet switch but ive bought one im going to fit and im not sure about the boot but i belive there is one. Main problem im having is wheer to get my hazard feeds.
Some help please?

onryboy

Posted: June 13, 2005 at 1:30 AM - IP Logged

--------------------------------------------------------------------------------

Starter blk/blu or grey ignition harness
Ignition black or green ignition harness
Accessory yellow ignition harness
Power Lock yel/blk or yel/blu + either kickwell
Power Unlock wht/vio or wht/grn + either kickwell
Parking Lights+ blue & blu/red at the steering column
Door Trigger black/red - n/s kick panel
Trunk/Hatch Pin orange/black at the bootlight
Trunk/Hatch Release orange/black at the release switch
Tachometer white/blue alternator
Brake Wire violet/black brake pedal switch
hopes it helps

Disclaimer: *All information is provided "as is Always check with your meter

DMM - Digital Multimeter. A digital meter that gives a precise reading of voltage, current, or resistance

__________________
CDTT ( CERTIFIED DUCT TAPE TECHNICIAN )