Re: speaker wire through doors ?
What a pain in the butt job!!!! Firstly the speaker wire needs to be threaded through from the door side into the body, pull the carpet kick panel back on the drivers side and you will see a big-ass connector, this needs to come out of the recess as well as the plastic behind it, you should have access into that space now. Pull the rubber tubing off at both ends, pass the cable through the rubber tubing and into the body, thread as much cable as you can into the body and then it should appear in that recess where the connector was, if not you should be able to reach up and get the cable.
The other side is the same except the ECU needs to come out....
Hope this helps :-)