berndnsue

Hey, guys, I'm looking to install a Ford Radio Cassette deck into our '85 F100 Police Paddy Wagon in NSW Australia.

The Cassette Deck Details are as follows:-
Ford 96DA-18B865-AA
Model No. FCT014A2-A (That's a Zero after the T)
Serial Number 10220915


There are 12 wires coming out the back and a Spade terminal moulded into the chassis of the deck.

Looking from the rear there are two connecting plugs, one larger (inch and 3/8 by 5/8 inch) and one small (inch by 5/8)...

The top Right Hand (large) one has 8 wires - From Left to Right they are:-

Top line -
- Grey/Green, Orange/Green, 1/4 inch gap, Brown, Green/Yellow, Blue/White.
Bottom line -
- Grey/Black, Orange/Black, 2 empty holes and a Blue/red directly under the Brown wire...then we have 2 more empty holes. -

The Bottom Left Connector has 4 wires - From Left to Right they are:-

Top Line -
- 1 empty hole, 1/4 inch gap, 1 empty hole, Pink/Blue.
Bottom line -
- 1 empty hole, Blue/Black, Blue/Red, 1 empty hole, Pink/Black (under the Pink/Blue).

I expect the pairs of colours will each go to a speaker so it's only the power wires which I need - the Blue/white, green/yellow, brown and blue/red wires.

I'm believe I can work out the truck wires.

Any assistance will be greatfully accepted.

Thanks, guys,
B

berndnsue

All msorted, folks.
Bernd.