which cam??? is the jury still out - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

dinga · 02-04-2004, 21:59

which way should i go??? i have a crow stage 2, should i get a crow stage 3 or go to wade/surecam and get a regrind for my xh ute.

the car has pacemakers etc and the crow stage 2 goes pretty good but as usual i want more power and a bigger cam profile.

has a verdict been reached on these cams????

any specs would be good also

cheers

Dempo · 02-04-2004, 22:43

i reckon go stage 2 mate, prety sure if you go stage 3 you may loose power unless you get a prgrammable after market chip???

Rollin · 02-04-2004, 23:18

im pretty sure that the stage 3 cam only works with a chip - at least 3 guys on here have fitted that cam and had head work done, and lost power, then had to buy a chip to get it back.

GO TO SURECAM DAMMIT!!!

dinga · 02-05-2004, 00:22

ok i have decided to go to surecam i WAS planning on going today but somebody has *cough* alzheimers *cough*

not ford · 02-05-2004, 01:29

Someone on this forum has done 150rwkws with the stg 3 cam and a Wolf 3d

Rollin · 02-05-2004, 01:38

Quote:

ok i have decided to go to surecam i WAS planning on going today but somebody has *cough* alzheimers *cough*

Con · 02-05-2004, 04:33

id follow rollins advice
http://www.surecam.com.au/web%20read...0OHC%20Hyd.htm

jonbays · 02-07-2004, 18:55

JMM Dev3HL will give abot 140-150 rwkw with std ecu.

The JMM cams are not cheap but neither is replacing the computer.

Its worth a thought. check out SOXX's posts

Soxx · 02-07-2004, 19:51

Yep, 161rwkw with standard ECU.

Rick.

Jah_Nix · 02-08-2004, 16:07

Got the DEV 5 which needs porting etc but 170+rwkw for 4900

(thats total price including exhaust, air box etc) and no chip!!!!
Chip her up for around 175+rwkw

But if cheap and easy with no porting I still think the DEV 3HL is awesome value cause you may even get ova 150rwkw if your engine is a happy one