CAMSHAFT Problem - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 12-02-04, 02:12 AM Thread Starter
Registered User
Join Date: Feb 2003
Location: Cairns
Posts: 65

Hi guys,

Just need abit of advice, just put a Stage 3 Crow Cam and Chip in my AU3 XR6 HP and when i reverse, change down to first and come to a stop at the lights and also sometimes when idling the car just dies. But the funny thing is when the AIRCON is on it's not so bad. I've cleaned the throttle body, reset the base idler, reset the computer, i even thought it might of even been the chip so i sent it back and they reprogrammed it for me. Does anyone know wats goin on? Do i have my camshaft timing wrong? (It's 4 degrees advanced if you need to know).

Please Help...



Mattnic2 is offline  
Sponsored Links
post #2 of 3 (permalink) Old 12-02-04, 02:23 AM
E-Series Acting VP
Thanatos's Avatar
Join Date: May 2002
Location: Melbourne
Age: 35
Posts: 1,432
Re: CAMSHAFT Problem

When you say you cleaned the throttle body, does that include the ISC???
If not, i'd try cleaning that.

Also, it may take a while for ECU to re-learn the new setup (even with a custom chip) so perhaps wait a couple of weeks and see if it gets any better...


Thanatos is offline  
post #3 of 3 (permalink) Old 12-02-04, 03:15 AM
Registered User
Join Date: Jul 2003
Posts: 251
Re: CAMSHAFT Problem

I havn't put a crow cam in my car before, but other cams you don't go x degree's advance or retard, you go by lift at top dead centre and dial it in with a dial indicator.
xfspacsix is offline  
Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Engine Specific Tech > Inline 6 Tech

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
2004 Ford Escape liftgate problem and steering column problem macollin Ford Escape | C-MAX | Mercury Mariner Forum 0 09-23-04 07:27 AM
87 Bronco-Fusible link problem, maybe? HELP ladyferricher Ford Bronco Forum 1 09-14-04 09:16 PM
Problem with alternator belt Blindin Inline 6 Tech 1 08-22-04 04:59 PM
Steering/wheel alignment problem mike98AUXR6VCT Suspension | Wheels&Tires | Brakes 10 04-23-04 04:33 AM
EF Wiper problem Darren.Parish General Tech 5 03-19-02 06:35 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome