Dynos in WA? - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

SVO XR6 · 10-08-2003, 02:41

Know any good dyno dudes in WA? I wanna get my chip tourque chip tuned. Cheers

TaraHymen · 10-08-2003, 09:49

the best i would recommend is Myaree Dyno Centre. they do alot of the bigger performance stuff. you can get em on 9330 5124.

otherwise there is barry's dyno tune(9350 5829) in cannington but i've found him to charge for champagne and then serve beer.

XF__UTE · 10-08-2003, 15:26

Yeah the guys in Myaree are good.

mongrelEB · 10-08-2003, 16:00

Don't use Ultra-Tune!!!

turbotrana · 10-10-2003, 16:38

I'd actually try to find someone who knows how to tune the chip first. If they dont know the program then you will spend alot of dyno time with them learning how to reprogram it. I think that guy up at Marks Workshop in York knows something about these chips. If your car is stock I wouldn't worry about a chip or tuning too much.

XF__UTE · 10-11-2003, 01:45

There's a bunch over in Canningvale that specialise in NOS & chipping. Can't remember their name, but they're in the Bannister Rd part of Canningvale.

XF__UTE · 10-11-2003, 01:48

They only wanted $800 for a concealed NOS setup in my AU. Would've been wild. $200 for refills. Maybe look at that. They conceal the bottle in a speaker box. run the piping through the chasis and use one of you switches ie. rear demister rather than a big flashing blue button. Nice and subtle.

TaraHymen · 10-11-2003, 02:25

Quote:

Originally Posted by XF__UTE

There's a bunch over in Canningvale that specialise in NOS & chipping. Can't remember their name, but they're in the Bannister Rd part of Canningvale.

try and remember thier name if u can. i work in canning vale just off bannister road and must have driven past em a million times and never noticed.

i know there is active automotive(eddie tassone) in canning vale just off nicholson road. actually speaking of eddie tassone, sorry to use a cliche but "i have a mate who" is a prick relative of eddie's and he just told me that eddie uses T&R Green Automotive in Beckenham for his dyno. if they can set up a twin turbo 383 stroker to generate 1500bhp i'm sure they can set up any system u throw at them.

Green T & R Automotive Services
393 Sevenoaks St Beckenham WA 6107
ph: (08) 9451 6193

btw, the bloke there u wanna speak to is Terry Green.

9psi EB · 10-12-2003, 16:49

Good luck trying to get the chip "tuned" anywhere in W.A.

Even Marks Workshop dont do them onsite.

If its a chiptorque chip, you will most likely need to log A/F Ratio's etc, send them with the chip back to chiptorque and get it modified accordingly.

SVO XR6 · 10-12-2003, 17:38

Yeah you do, i rang a few dudes and they siad they dyno it, find the a/f ratio, see what other mods have been done and then send chip over to factory to get "tuned".