landyboy

G'day, the father-in-law has asked me to post to see if anyone has heard of an early falcon crank that fits into a holden 202 motor to stroke it to around 208-211.

i guessed and said they may have had 3.4 to 3.5 litre engines before the 70's so it may be possible

any responses appreciated

Jon

notty

hey
yes this is true
and to do this you will need a zephyr 6 cylinder crank shaft!
i know this as i use one in my ski race boat!
and it doesnt just take it to 208 - 212 cu
mine is 60thou up with that crank and is 228 cui witch is the equal to 3.7ltr
also they are very strong and oh i nearly forgot you will need a set of Hemi 6 cylinder rods like out of a 245 or a 265 so that this setup will work!
very strong bottum end as i em getting arround 280hp naturally asspirated and i am soon to change to a blown setup and i will be looking at 400+hp
cheers
anything else you need help with just ask

landyboy

thanks very much

skid

hey
the other crank is the 221 crank this takes them to 232ci
drift

__________________
Fear leads to arrogance
Arrogance leads to over confidence
Over confidence leads to
your suffering
remember this young grasshopper

atec77

you need a 221 ci or known also as a 3.6 litre ford as from a an xw/xy or later , can be dround and fitted with bmw rods gives way over the std 202 ..