Gimo_1

I scored some thermo fans from work, iether from an ef or el. I was just wondering if i could squeeze these into my EA, maybe if i removed the engine fan?
I havnt got a chance to look at it yet so i thought i would ask if anyone here has done it before?

barry_v

i have done this conversion. if you do a search you'll find some threads covering this. the clutch fan and its shroud needs to be removed and the thermos fit right onto the radiator, very easy. the hardest bit is designing a way to control it, i used a repco thermo-switch ($40) running two relays (one for each fan). definatly worth it, quieter and has proven HP advantages.

__________________
1992 DC LTD 5.0
Duel exhaust, Genie extractors, Ported E7 heads, ported lower HO inlet, 70mm maf, Underdrive Pullies

Dellboy999

Remeber the clutch fan is LEFT HAND THREAD when removing it :0), other than that a reasonably simple job to put them in and hook them up, I have just put in 2 thermo fans in my car from repco, and they work great, i have 2 relays as well, remember if you have A/C that at least 1 fan will need to run in high for heat exchange across the condensor when the A/C is on.

Jason

__________________

Gimo_1

alright sounds good.
Thanks guys.

svo347

Theres a guy here who sells a complete wiring loom & is exactly what you are after.
Its worth $100,has a self diagnostic setup, 2 stage operation ie aircon control etc.
Best thing is hes here in Perth.
I bought one of his kits & havent looked back
Do a search on Thermofan conversion kits & you'll find what you need.
Cool..

__________________
FORD.... "POWER TO THE PEOPLE"...

Member of the "TKTDSGM " Group..

Rollin

look in this thread:

Clutch Fan To Thermos

i posted all the stuff you have to do, inc diagrams and stuff.

if any of the pics dont work let me know and i will link them again.

__________________
I can get new Genuine Holden/Ford/Audi/Land Rover/Honda parts cheap, PM me!