Does anybody know what injector sizes EA's and VL turbo's came out in as factory standard. And are they interchangable? Also did the VL turbo come standard with a rising rate fuel regulator? Were they any different on ex chasers.
__________________
Just a EBII I6 GLI with lukey extractors, 2 1/2 inch exhaust, K&N filter, malpassi Fuel regulator, Wolf 3Dv4 computer and stage 3 crow cam with vernier gear. ""158 rwkw""
can you use an ef fuel pressure regulator on an ea if you done the manafold conversion?
__________________
red ea s-pack 5 speed, engine, 4 wheels + spare, steering wheel, brakes, suspension, exhaust, 20w x 4 stock standerd stereo system, diff (rear wheel one), clutch, seats (including 2 retractable front seats) all with seat belts. Performance Mods : air filter removed, fuel filter removed, some guards taken off for weight reduction.
Location: gold coast and off playing with 32psi of boost pumping into 4.1lt of pure ohc feralness and developing a 350hp n/a kit for ea-au i6, also making 5.0lt gear soon enuf
Posts: 1,043
Re: Injector Sizes
the vl turbo injectors have a hose tail fitting from memory (not 100% sure)
that means, it would reguire you to fit a new custom fuel rail on.
all the i6 had 24 lb injectors, the v8 got the 19 lb one, except for au series tickford models.
the tr magna 4 cyl had 360cc injectors, these may be large enough for ya. if not the gtr skylines has 444cc items, and the series 5 rx7 pink injectors are 550cc's.
cheers.joe.
__________________
live in S.E. queensland? bit of a revhead? click here!!--> speedphreaks
1000hp is underway. rods,pistons here!! t88 on its way!!
Location: gold coast and off playing with 32psi of boost pumping into 4.1lt of pure ohc feralness and developing a 350hp n/a kit for ea-au i6, also making 5.0lt gear soon enuf
Posts: 1,043
Re: Injector Sizes
i am 95% sure. i havent done it my self. but have seen them in the flesh and they look very simular to the ea-el injector body.
cheers.joe.
__________________
live in S.E. queensland? bit of a revhead? click here!!--> speedphreaks
1000hp is underway. rods,pistons here!! t88 on its way!!
Last edited by gm dstroya; 03-28-2004 at 18:17.
Reason: spelling error
If using these direct fit, When changing INJECTORS make sure that OHMS & DESIGN types are the same, VL Turbo & non-turbo both have hose ends & don't fit........
If more info required use BOSCH Engine Management Components Catalogue....
Good Luck
__________________
Xtreme Ford Tuning Custom Tune with 278.2RWKW
1/4 mile time to come very soon
XR6T with Typhoon CAI
Bosch 0 280 155 968 Injectors
Custom Tune (Xtreme Ford Tuning)
Location: gold coast and off playing with 32psi of boost pumping into 4.1lt of pure ohc feralness and developing a 350hp n/a kit for ea-au i6, also making 5.0lt gear soon enuf
Posts: 1,043
Re: Injector Sizes
thanks for the info kjoy
cheers.joe.
__________________
live in S.E. queensland? bit of a revhead? click here!!--> speedphreaks
1000hp is underway. rods,pistons here!! t88 on its way!!
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
1000hp is underway. rods,pistons here!! t88 on its way!! 
Linear Mode
